Site Information

 Loading... Please wait...

RockitRulerFlex - New School


Now available in a flexible clear 34" size specially created for New School / Street Deck board building.

  • Now available in a flexible clear 34" size specially created for New School / Street Deck board building.
  • Image 2
  • Image 3
  • Image 4

Product Description:

The RockitRulerFlex is the second generation ruler for board builders:

• It’s clear so you can see right through it
• It’s flexible* so that it will wrap around the curves of your board
• It now includes a wheelbase ruler from the newly designed trucks template area

Available in 2 sizes, this shorter New School version 34” long is designed for Street Decks. The 47” length is for longboards with Old School trucks.

*this is not unbreakable. If bent too far, it may snap. Please use common sense.

RockitRulerFlex - New School

SKU:
RULNS
Shipping:
Calculated at checkout
Quantity:
Total Price:
$34.99
  Calculated at checkout
Share to facebook Share to Twitter Share to pin Share to Google Plusone Share to Twitter

RockitRulerFlex - New School

  • One clear 34” flexible ruler

 

Lay the ruler perpendicular to your sanded board, and using the Centre Finder found in the middle of the ruler, locate the center of the board and pencil a mark through the diamond shaped holes. Repeat this in 3 places along the length of the board.

Using the ruler as a straightedge, pencil a light line to connect the diamond marks.

(Proceed to drawing the template if board is to be trimmed out at this point.)

Line up the ruler so that the line shows in the diamond cutouts and mark your first set of truck holes using the baseplate template.

Without lifting the ruler, use the edge ruler to measure to the desired wheelbase and mark the second set of truck holes, the holes are spaced correctly for you.

Do not drill truck holes through this ruler, use your pencil marks instead.

Do not drill truck holes through this ruler, use your pencil marks instead.

This ruler will break if bent too far, so please be careful! We cannot replace them if this happens.

Q: What is the difference between Old and New School trucks?
A: Typically Old School trucks are for Long Boards and New School trucks are for Street Decks.

Write Review

This product hasn't received any reviews yet. Be the first to review this product!


Related Products

Our patented “Thin Air Press” system is a safe and easy-to-use manual vacuum press system for wood bending projects.

Thin Air Press